What CFM Do I Need for My Range Hood?

What CFM Do I Need for My Range Hood?

By Astberg Ventilation

Quick answer: Most home kitchens need a range hood rated between 200 and 600 CFM (about 340 to 1,020 CMH). The exact number depends on your kitchen size, your stove type, and how you cook. A small kitchen with light cooking may be fine at 200 to 300 CFM, while a large kitchen with a gas stove and heavy frying often needs 500 CFM or more.

Below, we explain three simple ways to calculate the right CFM, with worked examples you can copy.

What Is CFM and Why Does It Matter?

CFM (Cubic Feet per Minute) measures how much air a range hood can move every minute. CMH (Cubic Meters per Hour) is the same measurement in metric units. To convert, use this formula:

CMH = CFM x 1.7

A hood with too little CFM leaves smoke, grease, steam and cooking odours in your kitchen. A hood with far too much CFM wastes energy, makes more noise and can pull air back down other vents. The goal is to match the hood to your kitchen.

Method 1: Calculate CFM from Room Size (Air Changes per Hour)

This is the method we use at Astberg Ventilation. It is based on air changes per hour (ACH), which means how many times the full volume of air in a room is replaced every hour.

Formula:

CFM = (Room Area x Ceiling Height x Air Changes per Hour) / 60

We divide by 60 because ACH is measured per hour, while CFM is measured per minute.

Recommended air changes:

  • 1 to 1.5 ACH for general rooms such as bedrooms, living rooms and offices
  • 10 to 15 ACH for kitchens, because cooking produces heat, grease and moisture very quickly

Example 1: Bedroom (general ventilation)

  • Room: 100 sq ft, 8 ft ceiling = 800 cubic feet
  • At 1 ACH: 800 x 1 / 60 = about 13 CFM
  • At 1.5 ACH: 800 x 1.5 / 60 = 20 CFM
  • In metric: 13 x 1.7 = about 23 CMH, and 20 x 1.7 = 34 CMH

Example 2: Kitchen (range hood sizing)

  • Kitchen: 120 sq ft, 10 ft ceiling = 1,200 cubic feet
  • At 10 ACH: 1,200 x 10 / 60 = 200 CFM (about 340 CMH)
  • At 15 ACH: 1,200 x 15 / 60 = 300 CFM (about 510 CMH)

For everyday cooking, aim for the middle of this range. For heavy frying, aim for the top.

Method 2: Calculate CFM from Your Stove Type

Your cooktop produces most of the smoke and heat, so its type matters.

Electric or induction cooktop

A common rule is about 100 CFM for every 10 inches of cooktop width. A 30-inch electric cooktop needs roughly 300 CFM.

Gas cooktop

Gas stoves produce more heat and combustion by-products. Add up the total BTU rating of all burners and divide by 100.

  • Example: Four burners with a combined 40,000 BTU / 100 = 400 CFM

Professional-style or high-output ranges

These often need 600 CFM or more. Check the burner BTU rating and choose a hood that covers it.

Method 3: Adjust for Your Cooking Style

The calculation gives you a starting point. Your habits decide whether to go higher.

  • Light cooking (boiling, steaming, simmering): stay at the lower end of the range
  • Regular home cooking (sauteing, grilling): use the middle of the range
  • Heavy cooking (deep frying, tadka, wok cooking, searing, lots of spices): go toward the top, or add 20 to 30 percent

Other Factors That Change the CFM You Need

1. Duct length and bends. Every elbow and extra metre of duct reduces airflow. Long or twisting duct runs may need a more powerful hood.

2. Hood width. Your hood should be at least as wide as your cooktop, and ideally 3 inches wider on each side.

3. Mounting height. Hoods work best 24 to 30 inches above the cooktop. Mounting higher reduces capture, so you may need more CFM.

4. Ducted vs. ductless. Ducted hoods vent air outside and are more effective. Ductless hoods recirculate air through filters and generally perform lower in practice.

5. Noise level. High CFM can mean more noise. Look for a hood with variable speed settings so you can use full power only when needed.

Quick CFM Reference Table

Kitchen / Cooking Type

Suggested CFM

Approx. CMH

Small kitchen, light cooking

200 - 300

340 - 510

Medium kitchen, regular cooking

300 - 450

510 - 765

Large kitchen, gas stove

450 - 600

765 - 1,020

Heavy frying or professional range

600+

1,020+

Use the Astberg Ventilation CFM Calculator

Doing the math by hand is simple, but you do not have to. The Astberg Ventilation website has a built-in CFM calculator. Enter your room size and ceiling height, choose the air changes you need, and get your CFM and CMH instantly.

Calculate your CFM here: astbergventilation.com

Frequently Asked Questions

How many CFM do I need for a range hood?

Most kitchens need between 200 and 600 CFM. Use the formula CFM = (Area x Ceiling Height x ACH) / 60, with 10 to 15 ACH for kitchens, or match CFM to your stove type.

How do I convert CFM to CMH?

Multiply CFM by 1.7. For example, 300 CFM is about 510 CMH.

How do I convert CMH to CFM?

Divide CMH by 1.7. For example, 1,000 CMH is about 590 CFM.

Is 400 CFM enough for a range hood?

Yes, for most medium kitchens with an electric stove or moderate gas cooking. For heavy frying or a large gas range, 500 CFM or more is better.

Can a range hood have too much CFM?

Yes. Oversized hoods can be noisy, use more electricity and may cause backdrafting in homes with fuel-burning appliances. Choose a size that matches your kitchen instead of simply buying the biggest one.

How many air changes per hour do I need?

General rooms need about 1 to 1.5 ACH. Kitchens need much more, usually 10 to 15 ACH, because of cooking heat, smoke and grease.

Does duct length affect CFM?

Yes. Longer ducts and extra bends create resistance and reduce the real airflow, so a longer run may need a higher-rated hood.

Final Thoughts

Choosing the right CFM is the most important step in buying a range hood. Start with your room volume, check it against your stove type, then adjust for how you cook and how long your duct run is. If you want a fast, accurate answer, use the free calculator at Astberg Ventilation and pick a hood that fits your kitchen.